Clinton Electronics CE-VF540 User Manual
Page 16
12
Notes
• When using a DC lens, set the shutter mode to A.FLK if color rolling occurs.
• When the SHUTTER is set to ESC after selecting Internal Synchronization
Type, the picture may become unstable if the camera faces a bright
fluorescent light. Therefore, take care when choosing the installation
position.
• When the SHUTTER is set to MANUAL or A.FLK mode, SENS-UP will be
disabled.
AGC (AUTO GAIN CONTROL) : The higher the gain level, the brighter
the screen, but the higher the noise.
– OFF
: Deactivates the AGC function.
– LOW
: Allows automatic gain control from 5.3dB to 32dB.
– HIGH : Allows automatic gain control from 5.3dB to 37dB.
SENS-UP : When it is night or dark, the camera automatically detects
the light level and maintains a clear picture if this mode is
activated.
– OFF
: Deactivates the SENS-UP function.
– AUTO : Activates the SENS-UP function.
RETURN : Select this to save the changes in the EXPOSURE menu and
return to the SETUP menu.
Notes
• If you press the SET button in ‘AUTO’ mode, you can adjust brightness by
increasing or decreasing the shutter speed. (x2 ~ x512)
• Note that the higher the zoom level, the brighter the screen, but the more
likely it is that an after-image will appear.
• Although noise, spots, and whitish symptoms may occur in SENS-UP
operation when the zoom level is increased, this is normal.
a
SHUTTER continued