Troubleshooting – Clinton Electronics CE-VF540 User Manual
Page 30
Sales: 1-800-447-3306 Support: 1-800-549-6393 www.clintonelectronics.com
Troubleshooting
If you have trouble operating your camera, refer to the following table. If the
guidelines do not enable you to solve the problem, contact Clinton Electronics
Technical Support at 1-800-549-6393 or 815-633-1444.
Problem
Solution
Nothing appears on
the screen.
Check the power connection.
•
Check the video signal line connection.
•
Check the Brightness of Auto Iris lens.
•
The video image is not clear.
Check if the lens is clean. Clean the lens
•
with a clean cloth or brush.
Adjust the contrast feature of the monitor.
•
Make sure that the screen is not exposed
•
directly to a bright light. Move the camera
if necessary.
The screen is dark.
Adjust the contrast feature of the monitor.
•
If you have an intermediate device, set the
•
75Ω/Hi-z properly, and check the terminals.
Adjust the brightness level of the Auto Iris
•
lens.
There is a problem with
the camera operation.
The camera surface is too
hot and black stripes
appear on the screen.
Check if an appropriate power source to the
•
camera complies with the manufacturer’s
standard requirement, or if the voltage
keeps changing.
27