AT&T 76450 - Manual (Page 28)

Common Systems Connection Standards AT&T Services, Inc
Date: June 2013
ATT-TP-76450, Issue 15
Copyright © 2013, AT&T . All Rights Reserved.
Page 28
8.3.3 Applying Bar Codes to Cabinets
Avoid placing tag on doors of cabinets if it can be avoided.
•
Doors sometimes get replaced, thus losing the tag.
•
In the case of cabinets often the tag goes just inside the door on the actual frame.
Place tag on frame surface facing front aisle.
Avoid placing tags on any vendor labeling.
•
A prime example of this is when vendors place various labels just inside a cabinet.
In the case of cabinets/enclosures avoid putting the tag on the outside of the unit.
•
In the case of indoor units these tags often get missed, especially when the cabinet
is open.