11 appendix d - att contact list, 12 appendix e – acronyms – AT&T 76450 User Manual
Page 37
Common Systems Connection Standards AT&T Services, Inc
Date: June 2013
ATT-TP-76450, Issue 15
Copyright
©
2013, AT&T . All Rights Reserved.
Page 37
11 Appendix D - ATT Contact List
Wing Eng, Principal-Network Design-Engineer -Common Systems Standards, DSX, Copper
Cable Standards
(925) 823-4616, E-Mail:
Doug Florence, Principal-Network Design-Engineer ER - Common Systems Standards, New
Product Integration
(925) 867-9951, E-Mail:
Ed Granger, Principal-Network Design-Engineer - Common Systems
DC Power Section 2.
(203) 553-8189, E-Mail:
Wayne Hillesheim, Principal-Network Design-Engineer - Common Systems Standards
Alarm Standards
(706)374-3891, E-Mail:
Dave Overdorf, Principal-Product Development Engineer
- Common Systems Standards,
Synchronization Standards
770-232-9183, E-Mail:
John Tablerion, Principal-Network Design-Engineer- Common Systems Standards, ATT-TP-
76200 (NEBS)
(708) 403-4450, E-Mail:
Mike Yeilding, Principal-Network Design-Engineer - Common Systems Standards,
Fiber Section 5.
(925) 823-4747, E-Mail:
Keith Lanning- Principal-Network Design-Engineer Common Systems Standards,
Labeling Section ( 8.3)
Larry Payne- Principal-Network Design-Engineer Common Systems Standards
Lighting Section (8.3)
12 Appendix E – Acronyms
a) The term product supplier as used throughout this section refers to the equipment
manufacturer or agent of the equipment manufacturer, whichever is appropriate for the
product being considered.
b) Requirements are those product features that must be provided by the equipment
manufacturer. The words “shall” and “must” are used throughout this section to identify
requirements.
c) Objectives are product features that are desired for the long term use or application.
The word “should” is used throughout this section to identify objectives.