Allied Telesis SB251-13 User Manual

Page 46

Advertising
background image

46

Patch Release Note

Patch SB251-13 for Software Release 2.5.1

C613-10361-00 REV M

Typing “?” for Help at the CLI for the SHOW SWITCH FDB command
displayed some invalid parameters, and the valid STATUS parameter was
not displayed. This issue has been resolved.

The commands ADD SWITCH BLADE and DELETE SWITCH BLADE have
been disabled because they initiate internal SwitchBlade processes.

The firewall was not denying an ICMP packet, even if ICMP Forwarding
was disabled when using Standard NAT. This issue has been resolved.

On AT-9800 Series switches, the current directory for CompactFlash
changed when it should not have. This issue has been resolved.

The feature licence mismatch message was not showing when the master
has no feature licence, and the slave does.This issue has been resolved.

IPSec used with IPv4 sometimes caused a fatal error. This issue has been
resolved.

Some memory loss occurred when loading a file via HTTP. This issue has
been resolved.

If the firewall was enabled when BGP was in use, outgoing BGP data
packets would have IP header errors and incorrect checksums. This
problem has been resolved.

If, in a network comprising alternative paths, a link connecting to a
Candidate Rendezvous Point (CRP) was down, the CRP would not re-
advertise its RP candidacy on other paths. The switch would therefore not
update its PIM routes and re-establish the PIM tree in order for multicast
data to flow again. This issue has been resolved.

The SET TIME command caused an error on Refresh timers for IGMP
groups. This issue has been resolved.

The ENTRY parameter of the ADD IP FILTER command was not included
in the output of the SHOW CONFIG DYNAMIC command. This issue has
been resolved.

PCR: 03479

Module: SWI

Level: 3

PCR: 03483

Module: SWI

Level: 3

PCR: 03484

Module: FIREWALL

Level: 2

PCR: 03485

Module: CFLASH

Level: 2

PCR: 03489

Module: SYSR

Level: 2

PCR: 03490

Module: IPSEC

Level: 2

PCR: 03492

Module: HTTP, LOAD

Level: 3

PCR: 03494

Module: BGP, FIREWALL

Level: 2

PCR: 03497

Module: PIM, PIM6

Level: 2

PCR: 03499

Module: IPG

Level: 2

PCR: 03502

Module: IPG

Level: 3

Advertising