Triton Perspective - Manual (Page 103)

95 | P a g e F e b r u a r y 2 0 1 1
Select 'OK' when finished entering all parameters to return to the processing wizard.
Transducer Selection:
Users can select which head to process if multiple heads were used for data acquisition.
UTC Timing Delay:
Check this box if there is a known timing delay from using UTC timing. Enter the delay in
seconds.
Attitude Correction Thresholds:
Users can set the maximum amount of change between motion sensor updates.
Hit 'Next' to continue to the Beam Suppression dialog.
5.2.8 Beam Suppression
There are two tabs for defining filters to suppress beam soundings. The main tab is for 'Beam
Suppression' and has several options for suppressing beams as shown in the image below:
To enable beam suppression, the 'On' check box in the upper left corner needs to be checked.
A brief description of each suppression filter is presented below: