Triton Perspective - Manual (Page 105)

97 | P a g e F e b r u a r y 2 0 1 1
Each option must be individually enabled by checking the 'On' check box.
Suppress Using Pitch Range: This will suppress beam soundings if the pitch exceeds the
range of values entered.
Suppress Using Heave Range: This will suppress beam soundings if the heave exceeds the
range of values entered.
Suppress Using Roll Range: This will suppress beam soundings if the roll exceeds the range
of values entered.
Hit 'Next' to continue to the SVP Processing dialog.
5.2.9 SVP Processing
To enable the SVP Processing tab, the user must check the 'On' box in the upper left corner of
the dialog as shown in the image below: