Triton Perspective - Manual (Page 144)

136 | P a g e F e b r u a r y 2 0 1 1
Choose which lines to include by checking the box to the left of each line (they are all
checked by default), or by using the 'Select All' or 'Deselect All' buttons. Click on 'Finish'
when ready to add the chosen lines to the mosaic.
This will bring up the last page of the MosaicOne Wizard as shown below for adjusting the
line settings.
Select 'Finish' when done.
6.5 Force Regeneration
This option is only available at the sidescan data line file tree level as shown below:
Selecting this option will apply any changes made to the line settings since the mosaic was
created. This process happens automatically and there are no user set options available.