Triton Perspective - Manual (Page 56)

48 | P a g e F e b r u a r y 2 0 1 1
Options available in this window include:
 Resolution: Sets the output file resolution in meters/pixel. The size of the output file
in pixels will show next to Dimensions, just below the resolution.
 Tiles/Export: The slider bar below Dimensions is for indicating the number of tiles to
break up the export image, in order to reduce the individual file size of the output.
The image above shows the output in only 1 tile with resulting dimensions of each tile
being 4096 x 3703 pixels.
 Selection Tree: Allows the user to select or deselect imagery for the export.
Selecting the Export button will open the ‘Save GeoTIFF’ browser window for selecting a
location and file name for the export.
2.3.3 Imagery Batch GeoTiff Export
Sidescan and bathymetry data can be exported from an existing project from the File Tree.

For sidescan data, the Batch GeoTiff Export window is launched from the sidescan
root node only.

For bathymetry, the Batch Export GeoTiff is available from right-clicking on either
the Bathymetry root layer node or on an individual DTM as shown: