Triton Perspective - Manual (Page 110)

102 | P a g e F e b r u a r y 2 0 1 1
Selecting this will launch the BatyhOne Wizard.
After selecting the 'Rebuild using' option, a window will pop-up and ask if you want to re-
apply the flags already in the GSF from the parameters set when the DTM was created as
shown below:
Select 'Yes' if you want to do further processing of the DTM, or 'No' to ignore the existing
flags in the GSF and restart the processing from scratch. Both options start the BathyOne
Wizard, the difference is in the options available on the beam suppression page. If the user
selected 'No' in the GSF Flags window above, then the Beam Suppression page of the
BathyOne Wizard will look the same as during the create DTM process. However, selecting
'Yes' above will limit the user’s ability to change the beam suppression options as shown in
the image below: