Campbell Scientific TurfWeather Weather Station - Manual (Page 18)

TurfWeather Weather Station
17. In the Wizard Complete window, click on Finish, to go to the main
PC200W window.
18. From the Main Screen, click the Monitor Data tab to display the
measurements from the TurfWeather weather station. The weather station
is communicating and making measurements if the readings being
displayed look accurate and are updating.
19. If the station is communicating properly, click Disconnect. PC200W can
also be used to verify communication with radios after setting them up
using the procedure in Section 4.3, Radio Setup.
20. Proceed to Section 4.3, Radio Setup, if using radio communication. If the
TurfWeather station is a direct connect, move the key to the off position
and proceed to Section 5, Installation.
8