Campbell Scientific TurfWeather Weather Station - Manual (Page 19)

TurfWeather Weather Station
If the weather station does not function properly, contact your
local distributor to solve the problem before continuing to the next
steps.
4.3 Radio Setup
1. Attach the antenna or cable to the radio connector marked Antenna.
FIGURE 4-4 and FIGURE 4-5 show antennas that can be used with the
TurfWeather. In FIGURE 4-6, a whip antenna is attached to the Antenna
connector of an RF401A radio.
FIGURE 4-4. The surface mount antenna is often used for the base
station
FIGURE 4-5. A Yagi antenna used with TurfWeather station
2. Connect the serial cable male connector to the radio connector marked
RS-232 and the female connector to a computer serial port (FIGURE 4-6).
NOTE
9