Campbell Scientific TurfWeather Weather Station - Manual (Page 31)

TurfWeather Weather Station
supply, the external power supply needs to have an output of 18 Vdc and
weatherproof connectors to be compatible (see Section 2, Cautionary
Statements).
a. The internal sealed rechargeable battery must be recharged to
assure continued system function.
b. 16876 AC Converter when used must be installed in a non-
condensing environment or a weatherproof enclosure.
8. Remove the red or green cap from the solar radiation sensor (FIGURE
5-11). The cap protects the solar radiation sensor while the TurfWeather
is being shipped and installed. Accurate measurements require the cap to
be removed.
FIGURE 5-11. Remove the red or green cap
9. Properly ground the weather station (see Section 2, Cautionary
Statements). The 16775 Ground Kit is available for ground located
installations (see Section 5.4.6, 16775 Ground Kit Installation).
10. Turn the weather station key to the on position and return to the computer
site to confirm the weather station is working properly.
NOTE
21