Campbell Scientific TurfWeather Weather Station - Manual (Page 71)

Appendix A. TurfWeather Equipment
A.3 Mounting/Installation Kits
A.3.1 16776 Tripod/Mast Assembly
The 16776 tripod/mast assembly provides a stable support for the weather
station and is suitable for ground installations (see Section 5.4.1, Assemble the
16776 Tripod, for 16776 installation procedures).
The 16776 includes:
• Tripod
• Mast that places the weather station wind sensors at a height of 99 to 156
cm (38 to 60 in)
• Kit that includes (3) tripod feet with hardware, (6) lag bolts (used for
rooftop installations only), and (3) sealing pads (used for rooftop
installations only)
A.3.2 16770 Tripod Installation Kit
This kit includes equipment that helps you install the weather station to the
correct 3-axis vertical orientation and to align the station to the magnetic North
(see Section 5.4.1, Assemble the 16776 Tripod, for 16776 installation
procedures). Using the 16770 to properly orient the weather station helps
assure accurate measurements.
A-3