Anritsu Site Master S331D - Manual (Page 34)

bit 5: Channel Power On/Off
bit 6: Adjacent Channel Power On/Off
bit 7: Not Used
398) Printer Type 55
399) Current Language
(0 = English, 1 = French, 2 = German, 3 = Spanish, 4 = Chinese, 5 = Japanese)
400) LCD Contrast Value (0-255)
401) RTC battery 56 (higher byte)
402) RTC battery (lower byte)
403) PC board revision 57 (higher byte)
404) PC board revision (lower byte)
405) Reference Level Offset 58 (highest byte)
406) Reference Level Offset
407) Reference Level Offset
408) Reference Level Offset (lowest byte)
409-434) Not Used
Trigger Self-Test – Control Byte #21 (15h)
Description: Triggers a self test on the Site Master.
Bytes to Follow: 0 bytes
Site Master Returns: 12 bytes
1) Self-test report: (0b = Fail, 1b = Pass)
(LSB) bit 0 : Phase Lock Loop
bit 1 : Integrator
bit 2 : Battery
bit 3 : Temperature
bit 4 : EEPROM read/write
bit 5 : RTC Battery
bits 6- 7 : Not Used
2) Self-test report: (0b = Fail, 1b = Pass)
(LSB) bit 0 : Spectrum Analyzer Lock
bits 1–7 : Not Used
3) Battery Voltage (higher byte)
4) Battery Voltage (lower byte)
5) Temperature (higher byte)
6) Temperature (lower byte)
7) Lock Fail Counter (higher byte)
8) Lock Fail Counter (lower byte)
9) Integrator Fail Counter (higher byte)
10) Integrator Fail Counter (lower byte)
11) Spectrum Analyzer Lock Fail Counter (higher byte)
12) Spectrum Analyzer Lock Fail Counter (lower byte)
28 Site Master PM
55 See Control Byte #30 for supported printers.
56 Value sent as Volts * 10. For example, 2.7V = 27.
57 This value is for internal use only.
58 Value sent as (value in dBm * 1000) + 270,000