Samsung SCX-5639FR-XAA - Manual (Page 176)

16 2. Using a network-connected machine
Installing driver over the network
 
6
Windows
1 Make sure that the machine is connected to the network and
powered on. Also, your machine’s IP address should have
been set (see "Setting IP address" on page 12).
If the “Found New Hardware Wizard” appears during the
installation procedure, click Cancel to close the window.
2 Insert the supplied software CD into your CD-ROM drive.
Click Start > All programs > Accessories > Run.
Type X:\Setup.exe replacing “X” with the letter, which
represents your CD-ROM drive and click OK.
If you are a Windows XP, Vista, or 7 user, open the Windows
Explore window. Enter
\\[ip address] (example:
\\169.254.133.42) in the address field, and press the Enter
key or click Go.
Double-click Drivers > Setup.exe.
3 Select Install Now.
When you click the Advanced Installation, you can use the
Custom Installation option. The Custom Installation
allows you to select the machine’s connection and choose
individual components to install. Follow the instructions on
the window.
4 Read License Agreement, and select I accept the terms of
the License Agreement. Then, click Next.
The program searches for the machine.
If your machine is not found on the network or locally, an
error message appears.
• Check if you want to install the software without
connection of the printer.
- Check this option to install this program without a
machine connected. In this case, the print a test page
window will be skipped, and completes the installation.
- In this case, the XPS driver will not installed, and limit
the XPS-typed document’s direct printing.