Samsung SCX-5639FR-XAA - Manual (Page 60)

Media and tray
60 2. Menu overview and basic setup
• Before you load preprinted paper, verify that the ink on the paper
is dry. During the fusing process, wet ink can come off preprinted
paper, reducing print quality.
 
7
Setting the paper size and
After loading paper in the paper tray, set the paper size and using
the control panel buttons.
• Accessing menus may differ from model to model (see
"Accessing the menu" on page 32).
• It may be necessary to press OK to navigate to lower-level
menus for some models.
1 Select (Menu) > System Setup > Paper Setup > Paper
Size or Paper on the control panel.
Or select Setup> Machine Setup >Next > Paper Setup >
select a tray > Paper Size or Paper on the touch screen.
2 Select the tray and the option you want.
3 Press OK to save the selection.
• The settings set from the machine driver override the
settings on the control panel.
a To print from an application, open an application and
start the print menu.
b Open Printing Preferences (see "Opening printing
preferences" on page 66).
c Press the Paper tab and select an appropriate paper .
• If you want to use special-sized paper such as billing
paper, select the Paper tab > Size > Edit... and set
Custom Paper Size Settings in the Printing Preferences
(see "Opening printing preferences" on page 66).
 
8
Preparing originals
• Do not load paper smaller than 142 x 148 mm (5.6 x 5.8 inches) or
larger than 216 x 356 mm (8.5 x 14 inches).
• Do not attempt to load the following s of paper, in order to
prevent paper jam, low print quality and machine damage.
- Carbon-paper or carbon-backed paper
- Coated paper
- Onion skin or thin paper
- Wrinkled or creased paper
- Curled or rolled paper