Samsung SCX-5639FR-XAA - Manual (Page 229)

System setup
69 3. Useful setting menus
Scan PWR Save
Sets how long the machine’s scanner part waits
before going to power save mode.
When the scanner does not receive data for an
extended period of time, power consumption is
automatically lowered.
System Timeout
Sets the time that the machine remembers
previously used copy settings. After the timeout,
the machine restores the dafault copy settings.
Job Timeout
Sets the length of time the printer waits before
printing the last page of a print job that does not
end with a command to print the page.
Wakeup Event
You can set the condition to wake up from
power-save mode. Set the item on.
• Button Press: When you press any button
except power button, the machine wake up
from the power save mode.
• Printer: When you open or close the paper
tray, the machine wake up from the power
save mode.
Item Description
Auto Continue
Determine whether or not the machine
continues printing when it detects the paper
does not match the paper settings.
• Off: If a paper mismatch occurs, the machine
waits until you insert the correct paper.
• On: If a paper mismatch occurs, an error
message will display. The machine waits for
about 30 second, then automatically clear the
message and continue printing.
Altitude Adj.
Altitude
Adjustment
Optimize print quality according to the
machine’s altitude.
Auto CR
Allows you to append the required carriage
return to each line feed, which is useful for Unix
or DOS users.
Firmware
Version Shows the product’s firmware version.
AutoComplete
Provides sugestions while you type an email
address or fax number. This enables you to find
and select the data without typing it in
completely.
Item Description