Samsung SCX-5639FR-XAA - Manual (Page 203)

Wireless network setup
43 2. Using a network-connected machine
7 Enter the password and click OK.
8 Click Continue.
9 Read the license agreement and click Continue.
10 Click Agree to agree to the license agreement.
11 Click Continue.
12 Select Easy Install and click Install. Easy Install is
recommended for most users. All components necessary for
machine operations will be installed.
If you select Custom Install, you can choose which individual
operations will be installed.
13 Select the Wireless Setting and Installation option.
14 The software searches the wireless network.
If the search has failed, you may check if the USB cable is
connected between the computer and machine properly,
and follow the instructions in the window.
15 After searching, the window shows the wireless network
devices. Select the name (SSID) of the access point you are
using and click Next.
When you set the wireless configuration manually, click
Advanced Setting.
• Enter the wireless Network Name: Enter the SSID of the
access point you want with (SSID is case-sensitive).
• Operation Mode: Select Infrastructure.
• Authentication: Select an authentication type.
Open System: Authentication is not used, and encryption
may or may not be used, depending on the need for data
security.
Shared Key: Authentication is used. A device that has a
proper WEP key can access the network.
WPA Personal or WPA2 Personal: Select this option to
authenticate the print server based on WPA Pre-Shared
Key. This uses a shared secret key (generally called Pre-
Shared Key pass phrase) that is manually configured on
the access point and each of its clients.
• Encryption: Select the encryption. (None, WEP64,
WEP128, TKIP, AES, TKIP, AES)
• Network Key: Enter the encryption network key value.
• Confirm Network Key: Confirm the encryption network
key value.
• WEP Key Index: If you are using WEP Encryption, select
the appropriate WEP Key Index.