Samsung SCX-5639FR-XAA - Manual (Page 75)

75 2. Menu overview and basic setup
Basic scanning
 
19
Scanning using the contorl panel
This is the normal and usual procedure for scanning originals.
• Accessing menus may differ from model to model.
• It may be necessary to press OK to navigate to lower-level
menus for some models.
• If you want to scan using the network, refer to the
Advanced Guide (see Advanced Guide).
For USB connected machine
This is a basic scanning method for USB-connected machine.
1 Place a single document face down on the document glass, or
load the documents face up into the document feeder (see
"Loading originals" on page 61 ).
2 Select (scan) > Scan to PC > Local PC on the control panel.
Or select Scan > Local PC on the touch screen.
If you see Not Available message, check the port
connection, or select Enable Scan from Device Panel in
Samsung Easy Printer Manager > Switch to advanced
mode.
> Scan to PC Settings.
3 Select the application program you want and press OK.
Default setting is My Documents.
You can add or delete the folder where the scanned file is
saved in
Samsung Easy Printer Manager > Switch to
advanced mode.
> Scan to PC Settings.
4 Select the option you want and press OK.
• Scan Format appears only when you selected the Scan
destination to My Documents.
• If you want to scan from the default setting, press Start.
5 Scanning begins.