Samsung SCX-5639FR-XAA - Manual (Page 198)

Wireless network setup
38 2. Using a network-connected machine
14 After the installation is finished, a window asking you to print
a test page appears. If you want to print a test page, click Print
a test page.
Otherwise, just click Next and go to step 16.
15 If the test page prints out correctly, click Yes.
If not, click No to reprint it.
16 To register as a user of the machine in order to receive
information from Samsung, click On-line Registration.
17 Click Finish.
Ad hoc via USB cable
If you do not have an access point (AP), you may still connect the
machine wirelessly to your computer by setting up an ad-hoc
wireless network by following the simple steps below.
► Items to prepare
• Network-connected computer
• Software CD that was provided with your machine
• The machine installed with a wireless network interface
• USB cable
► Creating the ad hoc network in Windows
1 Check whether the USB cable is connected to the machine.
2 Turn on your computer and the wireless network machine.
3 Insert the supplied software CD into your CD-ROM drive.
Click Start > All programs > Accessories > Run.
Type X:\Setup.exe replacing “X” with the letter, which
represents your CD-ROM drive and click OK.