Samsung SCX-5639FR-XAA - Manual (Page 69)

Basic printing
69 2. Menu overview and basic setup
► Result simulator
Result Simulator shows the results of reduced emission of carbon
dioxide, used electricity, and the amount of saved paper in
accordance with the settings you selected.
• The results are calculated on the basis that the total number of
printed paper is one hundred without a blank page when the eco
mode is disabled.
• Referr to the calculation coefficient about CO2, energy, and
paper from IEA, the index of Ministry of Internal Affairs and
Communication of Japan and www.remanufactoring.org.uk.
Each model has a different index.
• The power consumption in printing mode refers to the average
printing power consupmtion of this machine.
• The actual saved or reduced amount may differ depending on
the operating system used, computing performance, application
software, connection method, media , media size, job
complexity, etc.
 
15
Secure printing
When you use a printing device in an office, school or other public
place, you can protect your personal documents or confidential
information by using the secure printing feature.
Starting secure printing on the driver
Open the Printing Preferences window (see "Opening printing
preferences" on page 66)
, and the select Advanced tab > Print Mode
> Confidential. Enter the job name, user ID, and password. Even
though you have started the secure printing job, the device will not
print the document until you enter your password on the printer.
• You can use this feature after installing the optional
memory.
• If you did not install optional memory, you can set the
menus as shown below:
1 From the printer’s control panel, select (Menu) >
System Setup > Maintenance > Ram Disk > Enable.
2 From a computer, select a printer from the printer list
> right-click the printer > select Properties > Device
Options
> Properties > Storage Options. Then check
the Ram Disk option (see "Opening printing
preferences" on page 66)
.
Printing secure documents from the control panel
1 Select (Menu) > System Setup > Job Manage > Stored
Job on the printer’s control panel.
2 Select the document to print.