Axis Communications LBP 5200 - Manual (Page 130)

Installing the CAPT Software 3-45
Setting Up the Pr
inting En
vironment
3
Installing using the [Add Printer Wizard]
IMPORTANT
If you want to print a test page, make sure that the printer is properly connected to the
computer and that the printer is turned on before installing the CAPT software.
NOTE
When installing the CAPT software using the [Add Printer Wizard], the USB port that you
connect the printer to needs to have been setup previously.
1
Turn the computer on and start up Windows XP/Server 2003.
IMPORTANT
If the Plug and Play automatic setup wizard appears, click [Cancel] and install the
CAPT software using this procedure.
2
Log on as a user who is a member of the Administrators
group.
NOTE
Full Control Permission is required for the installation of the printer driver.
3
Open the [Printers and Faxes] folder.
For Windows XP Professional/Server 2003:
Select [Printers and Faxes] from the [Start] menu.
For Windows XP Home Edition:
Select [Control Panel] from the [Start] menu, then click [Printers and Other
Hardware]
➞ [Printers and Faxes].