Axis Communications LBP 5200 - Manual (Page 32)

Connecting the Power Cord 1-9
Bef
ore
Y
ou Star
t Using
This Pr
inter
1
CAUTION
• Do not use a power source with a voltage other than that indicated. Doing so
may cause fire or electrical shock.
• When you unplug the power cord, make sure you hold the cord by the plug. If
you pull on the cord itself, the cord may experience damage such as exposure
of the core wires or an open circuit, and electrical current flowing out of the
damaged section can cause fires or electrical shock.
• Whenever you pull out the power plug, make sure there are no objects around
the power plug. Do not pull out the power plug in an emergency.
IMPORTANT
• Do not plug the power cord into the auxiliary power outlet of a computer.
• One AC power outlet should be used exclusively for the printer.
• Do not connect this printer to an uninterruptible power supply. The printer may
malfunction when a power outage occurs, and there is a risk of damaging the printer.
1
Make sure that the power switch of the printer is turned OFF.
The printer is off when the switch is flush with the surface of the printer.
2
Plug the supplied power cord securely into the power socket
on the printer.