Axis Communications LBP 5200 - Manual (Page 35)

Turning the Printer ON and OFF 1-12
Bef
ore
Y
ou Star
t Using
This Pr
inter
1
The indicator lights on the printer turn on and the printer initiates a self-diagnostic
test of the main unit and optional accessories.
If no abnormalities are found during the self-diagnostic test, the Ready lamp
(blue) lights up, and the printer is ready to print.
Turning the Printer OFF
Use the following procedure to turn the printer off.
IMPORTANT
• If the printer is used on a network, make sure that it is not printing data from another
computer before turning the power off.
• When the printer is turned off, any remaining print data in the printer's memory is erased.
If you need the print data, wait for the printer to finish printing before turning the power
off.
• Do not turn the power off under any of the following conditions:
- The printer is in the middle of printing.
- The printer is in the middle of the self-diagnostic test that runs immediately after the
power is turned on.
1
Press the power switch.
The printer is off when the switch is flush with the surface of the printer.
IMPORTANT
When the power switch is not pressed in, the power consumption is 0 W.
Illuminate