Axis Communications LBP 5200 - Manual (Page 34)

Turning the Printer ON and OFF 1-11
Bef
ore
Y
ou Star
t Using
This Pr
inter
1
Turning the Printer ON and OFF
The printer can be turned on and off using the power switch on the left side of the
printer body. To avoid running into unexpected problems, be sure to correctly
memorize the procedure.
Turning the Printer ON
To begin using the printer, press the power switch to turn the printer on. After
running a check on the state of the main unit and optional accessories
(self-diagnostic test), the printer is ready to print.
IMPORTANT
• Do not turn the printer on again immediately after turning the printer off. If you want to
turn the printer on again after turning it off, wait at least 3 seconds after turning the printer
off before turning it on again.
• Refer to "Troubleshooting," on p. 7-1 if the printer does not operate properly, or an error
message appears in the Printer Status Window.
1
Press the power switch.
The printer is on when the power switch is depressed.