Verifying the contents of the package, Parts and their functions, Verifying the contents of the package -13 – Axis Communications LBP 5200 User Manual
Page 308: Parts and their functions -13
Installing the Network Board (AXIS 1611)
6-13
Optional Accessor
ies
6
Verifying the Contents of the Package
Before installing the network board, make sure that all of the following items are
present in the package. In the rare event that any components are missing or
damaged, contact the store where you purchased the board.
NOTE
A LAN cable is not supplied with the network board. If you are installing the network
board to connect the printer to a network, you will need a category 5 twisted pair cable.
Cables, hubs, etc. should be obtained separately as required.
Parts and Their Functions
a
a
a
a Printer Connector
This is the connector that plugs into the printer. Do
not touch the connector with your fingers.
b
b
b
b LAN Connector
Connects to a 10BASE-T/100BASE-TX LAN cable.
c
c
c
c Status Lamp
Shows the status of the network board. If the lamp
flashes when the LAN cable is not connected, the
network board is malfunctioning.
d
d
d
d Power Lamp
This light turns on when the printer is on. If this lamp
does not come on when the printer is turned on, the
network board is malfunctioning.
e
e
e
e MAC Address Label
Displays the MAC address of this network board.
Network Board
(AXIS 1611)
AXIS 1611
User's Manual
a
e
d c b