Rack mounting – ADC ICX-250 User Manual
Page 15
Advertising
Installing the ICX-250
System Basics 9
Issue 1, September 1998
ADCP-62-023
© 1998, ADC Telecommunications, Inc.
Rack Mounting
The chassis comes with brackets for rack mounting. The installation site
for rack mounting should provide proper room for ventilation and cable
routing. Provide at least 2 inches of clearance between each ICX-250 unit
to allow for removal of the top if necessary for resetting of switches.
1RWH
Check all grounding instructions when
installing the ICX-250 unit in a rack. Proper
grounding is mandatory at all times.
The following figure depicts a 19” rack mount configuration.
FXS Channel Status
Data Loop 2
Lcl. Off Net.
1 3 5 7 9 11 13 15 17 19 21 23
2 4 6 8 10 12 14 16 18 20 22 24
Center Mount
Flush Mount
Advertising