ADC ICX-250 - Manual (Page 31)

26 Configuring the ICX-250 Switches
ADCP-62-023 Issue 1, September 1998
© 1998, ADC Telecommunications, Inc.
FXS Ports (per line) - Transmit / Receive (DIP switch - internal)
Description: These are eight position DIP switches used to set Transmit and Receive FXS
attenuation (TLP Setting).
Factory Setting: 3 dB (OFF) The DIP switch layout shown above is an example using 3 dB of
attenuation on the Transmit side (positions 2,4,6,8 off) and 9 dB on the Receive side (positions
1,3,5,7 on). If it is necessary to change the Transmit setting to attenuate the line by 9 dB, the related
switch position(s) would be set to the “On” setting. Receive side settings would be changed from
9 dB to 3 dB by moving the related switch position to “Off.” See the chart on page 27 for more detail
on the switch settings. 3dB: Transmit / Receive path will be attenuated by 3 dB (+/
– 0.5). 9dB:
Transmit / Receive path will be attenuated by 9 dB (+/
–
0.5).
!! ATTENTION !! The above FXS Port settings are
repeated for each of the 12 or 24 lines.
1 2 3 4 5 6 7 8
ON DIP
S7
1 2 3 4 5 6 7 8
ON DIP
S6
1 2 3 4 5 6 7 8
ON DIP
S17
1 2 3 4 5 6 7 8
ON DIP
S18
1 2 3 4 5 6 7 8
ON DIP
S19
1 2 3 4 5 6 7 8
ON DIP
S14
1 2 3 4 5 6 7 8
ON DIP
S16
1 2 3 4 5 6 7 8
ON DIP
S15
S1 S2 S3 S4 S5
BACK
FRONT
S16
S15
S19
S18
S17
S14
S7 S6
1 2 3 4 5 6 7 8
ON DIP 9 dB
3 dB
FXS Ports
Receive
4 3 2 1
Transmit
FXS Ports
4 3 2 1
Attenuation
Loss
(or Loss)