Karcher KM 170-600 R Lpg User Manual

Page 29

Advertising
background image

-

12

Replace the dust filter.

Close the filter cover.

The V-belt drive has an automatic tension-
ing device; the V-belt tension cannot be ad-
justed.

Check the V-belt. Have defective parts
replaced by Customer Service.
Have the inspection done according to
the service manual.

1 Lock
2 Air filter housing

Open the lock.

Remove the air filter housing.

Replace the air filter insert.
Note: Installation position with blowout
opening pointing down (see illustra-
tion).

Unscrew the wing nut from the centrifu-
gal separator.

Clean the centrifugal separator.

Unscrew the head lamps.

Take out the head lamps and pull out
the plug.

Note: Note the positions of the plugs.

Dismantle the head lamps.

Dismantle the head lamp casing and
hold it horizontally because the lamp
unit is not fastened.

Unlock the bracked and take out the
bulb.

Insert new bulb.

Reinstall in reverse sequence.

Fuse box - work station

Open the fuse holder.

Check the fuses.

Fuse box foot space
Note: Located in the electronics casing be-
hind the cover in the foot space.

Open the 4 screws of the cover.

Remove cover.

Open electronics casing.
Caution: Only our authorised service
department may open the casing and
replace the fuses.

Check the fuses.

Fuse box motor room
Note: The fuses FU 01 and FU 14 are lo-
cated in the motor compartment.

Replace defective fuses.
Note: Only use fuses with identical
safety ratings.

Checking the V-Belt

Check air filter and replace, if necessary

1

2

Changing the headlight bulb (option)

Replacing fuses

FU 01 Main fuse

-- 60 A

FU 02 Gas cylinder fill level in-

dicator

B 5 A

FU 03 Safety relay

Multifunction display

B 7.5 A

FU 04 Blinker switch

A 10 A

FU 05 Motor control ignition

B 10 A

FU 06 Oil cooler

A 25 A

FU 07 Program selection

switch
Waste container func-
tions

A 15 A

FU 08 Audible warning signal

reverse drive

B 10 A

FU 09 Left lighting

A 7.5 A

FU 10 Right lighting

A 7.5 A

FU 11 Front work lights (low

beam)

A 10 A

FU 12 Vibrator system

Beacon lamp

B 20 A

FU 13 Water pump

3. Side brushes

B 15 A

FU 14 Fanmotor capacitor

-- 40 A

FU 15 Motor control starter

C 20 A

FU 16 Motor control central

C 30 A

FU 17 Motor control MPR coil

C 20 A

FU 18 Air conditioning control

(option) + cab

C 20 A

FU 19 Motor control battery

voltage

C 20 A

FU 20 Radiator fan

C 25 A

29

EN

Advertising
This manual is related to the following products: