Cyclades PR1000 - Manual (Page 14)

Cyclades-PR1000
Chapter 2 - What is in the Box 14
The X.21 Model
DB-15
Male
Back Panel of PR1000
DB-25
Male
X.21 DSU/CSU
with DB-15
Interface
Console Cable
Labeled “Conf”
or “Console”
To COM Port
of Computer
Power Source
To Wall Outlet
X.21 Modem
Cable
1 0
WAN On/O
ff Ethernet Console
FIGURE 2.2 X.21 MODEL
Figure 2.2 shows which cable (purchased separately) should be used for an X.21 modem and how everything should
be connected. The pinout diagram of this cable appears in Appendix B of the Installation Manual.
Cyclades recommends the use of Category 5, shielded twisted-pair cables for Fast Ethernet connections.
The Cyclades-PR1000 comes with rubber pads to prevent it from slipping on a horizontal surface. It may be
necessary to affix the router more securely to either a horizontal or vertical surface. To this end, Velcro® strips
and screws have been provided.