Cyclades PR1000 - Manual (Page 22)

Cyclades-PR1000
Chapter 3 - Using CyROS Menus 22
The CyROS Management Utility
After one of the interfaces has been connected and configured, there is another way to interact with CyROS. Type the
IP address in the location field in an HTML browser of a PC connected locally or remotely through the configured
interface. A super-user ID and password will be requested (these are the same ID and password used with the line-
terminal interface). A clickable image of the router back panel will apear, as shown in Figure 3.2.
Configuration Menu Interface (Text Mode)
End HTTP session
Cyros Management Utility
Firmware version: Cyclades-PR1000: CyROS V_1.9.5
1 0
WAN
On/Of
f
Ethernet Console
FIGURE 3.2 CYROS MANAGEMENT UTILITY HOME PAGE