Cyclades PR1000 User Manual
Page 26
Cyclades-PR1000
26
Chapter 4 - Step-by-Step Instructions
Parameter
Example
Your Application
IP fragmentation -
Ignore Bit DF
Yes
NAT
Local
ICMP Port
Inactive
Incoming Rule List
None, filters are not included in this
example.
Outgoing Rule List
Name
None, filters are not included in this
example.
Proxy ARP
Inactive
IP Bridge
Inactive
FIGURE 4.2 ETHERNET NETWORK PROTOCOL MENU PARAMETERS (CONTINUED)
STEP TWO
No more parameters are necessary for the Ethernet interface. The other interface to be configured is the SWAN.
The SWAN physical media parameters are shown in Figure 4.3. Fill in the values for your application. The SWAN
configuration is described in more detail in chapter 6 of the Installation Manual.
Menu CONFIG=>INTERFACE=>SWAN=>PHYSICAL
Parameter
Example
Your Application
Mode
Asynchronous
Speed
38.4k
FIGURE 4.3 SWAN PHYSICAL MENU PARAMETERS