Cyclades PR1000 User Manual
Page 29
Advertising
Cyclades-PR1000
29
Chapter 4 - Step-by-Step Instructions
STEP FIVE
Since a modem is used in the example, the dial-out table must be configured. This is done as shown in Figure 4.6.
Menu CONFIG=>SYSTEM=>MODEMS=>DIAL OUT TABLE=>ADD
Parameter
Example
Your Application
IP Address
Type in any valid IP address not on
the local network.
Init String
at
Dial String
atdt+phone number of access
provider.
Authentication Method
PAP/CHAP/BOTH—depends on the
service provider.
Login Name
Login name device receiving call is
expecting.
Password
Password device receiving call is
expecting.
FIGURE 4.6 MODEM DIAL-OUT TABLE PARAMETERS
Advertising