Cyclades PR1000 User Manual
Page 28
Cyclades-PR1000
28
Chapter 4 - Step-by-Step Instructions
STEP FOUR
The Encapsulation parameters for PPP are less straight-forward. Many of them are based on decisions that
cannot be shown in a diagram. Fortunately, the choices made here will mostly affect the performance of the link,
rather than whether it works or not. Fill in the parameters appropriate for your system, consulting chapter 8 of the
Installation Manual for more information if necessary.
Menu CONFIG=>INTERFACE=>SWAN=>ENCAPSULATION=>PPP
Parameter
Example
Your Application
MLPPP
No
PPP Inactivity
Timeout
None
so that the connection is never
broken.
Enable Van Jacobson
IP Header
Compression
No
Disable LCP Echo
Requests
No
Edit ACCM
No Value. This will depend on the
modem used.
Time Interval to Send
Config Requests
Use the preset value, one.
Enable Predictor
Compression
No
Connection Type
Dial-Out
FIGURE 4.5 PPP ENCAPSULATION MENU PARAMETERS