Cyclades PR1000 User Manual
Page 56
Advertising
Chapter 8 - Data-Link Protocols (Encapsulation)
Cyclades-PR1000
56
STEP TWO
After configuring the general parameters, each DLC must be defined. An example will be used to demonstrate the procedure.
A public Frame Relay network connecting offices in São Paulo, Rio de Janeiro, Salvador, and Recife is shown in Figure 11.1.
Each router will have a routing table pairing destination network with router interface and gateway. A Frame Relay
Address Map is also created (either statically or dynamically) to associate each DLCI with the destination router IP.
For the router in Salvador, the Frame Relay address map will look like this:
DLCI
IP
11
200.1.1.1
21
200.1.1.4
81
200.1.1.3
Advertising