Cyclades PR1000 - Manual (Page 43)

Chapter 5 - Configuration of the Ethernet Interface 43
Cyclades-PR1000
IP Bridge
An IP Bridge is used to divide a network without subnetting. Whenever a subnetwork is created, two IP numbers
are lost — one describing the network and the other reserved for broadcast. This does not occur with an IP
Bridge.
PR1000
PR3000
ETH0
ETH0
200.240.240.1
200.240.240.4
200.240.240.8
200.240.240.2
200.240.240.3
200.240.240.9
Link 1
..................................
FIGURE 5.1 IP BRIDGE EXAMPLE