AMX NetLinx Integrated Controllers NI-3000 - Manual (Page 118)

Programming
112 NetLinx Integrated Controllers
Program Port Commands (Cont.)
SET IP <D:P:S> Prompts you to enter a Host Name, Type (DHCP or Fixed), IP address,
Subnet Mask, and Gateway IP address. Enter Y (yes) to approve/store the
information in the Master Card. Entering N (no) cancels the operation.
SET TIME Prompts you to enter the new time for the Master Card.
When the time is set on the Master Card, the new time will be reflected on
all devices in the system that have clocks (i.e. touch panels). By the same
token, if you set the time on any system device, the new time will be
reflected on the system’s Master, and all connected devices.
This will not update clocks on devices connected to another Master (in
Master-to-Master systems)
SET URL <D:P:S> Prompts you to enter the URL address and port number. Enter Y (yes) to
approve/store the new addresses in the Master Card. Entering N (no)
cancels the operation.
SHOW DEVICE <D:P:S> Displays a list of all devices present on the bus.
SHOW LOG Displays the log of messages stored in the Master's memory. The Master
logs all internal messages and keeps the most recent messages. The log
contains:
• Entries starting with first specified or most recent.
• Date, Day, and Time message was logged.
• Which object originated the message.
• The text of the message:
SHOW LOG [start] [end]
SHOW LOG ALL
• If start is not entered, the most recent will be first.
• If end is not entered, the last 20 messages will be shown.
• If ALL is entered, all stored messages will be shown, starting with the
most recent.
SHOW NOTIFY Displays a list of devices that other systems have requested input from
and the types of information needed. Note that the local system number is
1061.
SHOW REMOTE Displays a list of the devices this system requires input from and the types
of information needed. When a NetLinx Master connects to another
NetLinx Master, the newly connecting system has a device that the local
system desires input from; the new system is told what information is
desired from what device. Note the local system number is 1062.
SHOW ROUTE Displays information about how this NetLinx Master is connected to other
NetLinx Masters.
SHOW SYSTEM Provides a list of all devices in all systems currently on-line. The system’s
lists are either directly connected to this Master (i.e. 1 hop away), or are
referenced in the DEFINE_DEVICE section of the NetLinx program. You
may provide the desired system number as a parameter to display only
that system's information (e.g. SHOW SYSTEM 2001). The systems listed
are shown in numerical order.
TCP LIST Lists all active TCP/IP connections.
TIME Displays the current time on the Master Card.
URL LIST <D:P:S> Displays the list of URL addresses programmed in the Master Card.