Agilent Technologies N-Series - Manual (Page 53)

User’s Manual Page 4-32
rotation.
name is the name of the window (up to seven characters).
/F is replaced with /s for storage only, or with /p for storage and printing.
X, Y are the coordinates for the origin of the duplicate window.
X
n
, Y
n
are the coordinates of other duplicate windows if more than one is to
be made on the page.
Fields prior to the semicolon are optional, although blank fields must still
be separated by a comma. Fields after the semicolon are required.
This command may be placed anywhere in a document where graphics are
desired.
Graphic Line
▲
COMMAND: COMMAND: COMMAND: COMMAND: COMMAND:
s
gl gl gl gl gl T;X T;X T;X T;X T;X
1 1 1 1 1
,Y ,Y ,Y ,Y ,Y
1 1 1 1 1
,X ,X ,X ,X ,X
2 2 2 2 2
,Y ,Y ,Y ,Y ,Y
2 2 2 2 2
,X ,X ,X ,X ,X
n n n n n
,Y ,Y ,Y ,Y ,Y
n n n n n
d
▲
RANGE: RANGE: RANGE: RANGE: RANGE: T=1-15 T=1-15 T=1-15 T=1-15 T=1-15
This command draws lines between any two points within a graphic
window, where:
T is the thickness of the line. Value should be an odd number
X
1
, Y
1
are the coordinates of the first point in the line.
X
2
, Y
2
are the coordinates of the first segment endpoint.
X
n
, Y
n
are the coordinates of the next segment endpoint.
Graphic Arc
▲
COMMAND: COMMAND: COMMAND: COMMAND: COMMAND:
s
ga ga ga ga ga T;X,Y,r T;X,Y,r T;X,Y,r T;X,Y,r T;X,Y,r,,,,,S S S S S
2 2 2 2 2
,E ,E ,E ,E ,E
2 2 2 2 2
,S ,S ,S ,S ,S
n n n n n
,E ,E ,E ,E ,E
n n n n n
d
▲
RANGE: RANGE: RANGE: RANGE: RANGE: See Below See Below See Below See Below See Below
This command draws arcs and circles within a graphic window, where:
T is the thickness of the line in pixels (no more than one-half the size of r)