Agilent Technologies N-Series - Manual (Page 68)

Page 5-47 XTRAEDIT CONFIGURATION
Language
Language is used to select the language used by the printer (U.S. English
is the default). The user also can choose U.K. English, French, Dutch,
Spanish, Italian, Danish, Norwegian, Finnish, German, Swedish, French
Canadian and Latin American. Theses ASCII character sets, and the ISO
character set, can be found listed in other reference documentation.
These choices are equivalent to those available on the Xerox 4213 Model
II printer, with the exception of Belgian and Portuguese, which are
EBCDIC fonts. EBCDIC is not supported by the XLI.
Character Set
Character Set options include ASCII, ISO and PC. The default is ASCII.
These choices are equivalent to those available by setting dip switches on
the Xerox 4045-160 printer.
Line Spacing
Line Spacing provides the choices of Absolute, Half, Single, 1 1/2,
Double, 2 1/2 or Triple. Single spacing is the default.
This option is equivalent to the XES Line Spacing command.
Absolute Line Spacing
Absolute Line Spacing is used to specify a value for spacing when
Absolute has been selected under Line Spacing. The value can be entered
in inches, 1/300 inches or 1/60 inches, depending upon the setting of
Measurement Setting for Entries under the Preferences menu. If inches,
the user can enter a value between 0.000 and 14.000. In 1/300 inches, the
user can enter an integer value between 0 and 4200. In 1/60 inches, the
user can enter an integer value between 0 and 840. The default is 0.
This option is equivalent to the XES Line Spacing Absolute command.
Justification
Justification choices are Off, Normal and Forced. The default is Off.
The Forced option is equivalent to the XES Justification Unlimited
command, Normal is equivalent to the Justification Start command, and
Off is equivalent to the Justification Stop command.