Agilent Technologies N-Series - Manual (Page 84)

Page 5-63 XTRAEDIT CONFIGURATION
Fonts can be used by selecting them with an XES Font Change command.
Fonts can be selected from among simulated fonts that have been
downloaded to the printer, or fonts that have been stored in flash
memory.
View Installed Fonts
View Installed Fonts will display a list of all fonts that the user has
installed in the XLi’s flash memory. Users can display font names for
which there is insufficient room on the screen by using the arrow keys un.
Load Font
Load Font will display a dialog box that will allow the user to load fonts
from a diskette to the XLi’s flash memory. Loading a font is equivalent
to having a font on a cartridge installed in a Xerox 4045-160 printer, with
the advantage that the user can choose which fonts are present. Fonts
installed in the XLi’s flash memory, unlike fonts downloaded to the
printer, are stored permanently, even when power has been disconnected
from the unit. To conserve space, all installed fonts are desixelized and
compressed.
Note: To obtain XES fonts on a diskette, contact the Xerox Font Centre at
(800) 445-FONT.
F1=Help Alt-X=Exit Enter=OK/Select ItemEsc=Cancel/Previous MenuF10=Menu
Configure File
View Installed Fonts
Load Font
Delete Font
Pack X/TRA Memory
Non-Shrinkable Fonts
Load Resources File
AGILE X/TRA Configuration, Version 1.26
File Configure
Configuration to edit: 0
Default powerup config: 0