Sony MHC-DP1000D - Manual (Page 14)

14 GB
Specifying the distance of
the speakers
Use the remote for the operation.
1
Press AMP MENU.
2
From your listening position, press v
or V repeatedly to select the parameter.
Adjustable parameters are described below.
3
Press b or B repeatedly to select the
setting you want.
4
Repeat steps 2 to 3 to set other
parameters.
5
Press ENTER.
Tips
• You can use the digipad instead of the cursor
buttons (v/V/b/B).
• You can use “SPEAKER SETUP” in the Setup
Display to specify the distance of the speakers
(page 21).
Note
If each of the front or rear speakers is not placed at an
equal distance from your listening position, set the
distance of the closest speaker.
Adjustable parameters
The default settings are in the parentheses.
• FRONT: 1.0 meter to 12.0 meters (2.4 meters)
(3 feet to 40 feet (8 feet))*
Front speakers distance.
• CENTER: FRONT to 1.5 meters (2.4 meters)
(FRONT to 5 feet (8 feet))*
Center speaker distance.
• REAR: FRONT to 4.5 meters (1.5 meters)
(FRONT to 15 feet (5 feet))*
Rear speakers distance.
* North American model only.
Notes
• To enjoy Dolby Pro Logic surround with 2 channel
PCM or analog input sources, select “NORMAL
SURR” from the sound effect options (see page 47).
• If you press AMP MENU while adjusting
parameters using OSD, the OSD turns off.
Setting up your speakers for Dolby
Pro Logic (continued)
Specifying the speaker
parameters
Use the remote for the operation.
1
From your listening position, press
SPEAKER LEVEL.
Adjustable menus and parameters are
described below.
2
Press v or V repeatedly to select the
parameter.
3
Press b or B repeatedly to select the
setting you want.
4
Repeat steps 2 to 3 to set other
parameters.
5
Press ENTER.
Tips
• You can use the digipad instead of the cursor
buttons (v/V/b/B).
• You can use “SPEAKER SETUP” in the Setup
Display to specify the balance, level, and test tone
parameters (page 21).
Adjustable parameters
The default settings are in the parentheses.
x BALANCE
• FRNT L___R: (center)
Balance between the front left and right
speakers.
• (MHC-DP1000D only)
REAR L___R: (center)
Balance between the rear left and right
speakers.
Range: 6 dB (L) to 6 dB (R), 1 dB steps
x LEVEL (MHC-DP1000D only)
• REAR ** dB: (0 dB)
Level of the rear speakers.
Range: –6 dB to 6 dB, 1 dB steps
• CTR ** dB: (0 dB)
Level of the center speaker.
Range: –6 dB to 6 dB, 1 dB steps
• SW ** dB: (10 dB)
Level of the sub woofer.
Range: –10 dB to 10 dB, 1 dB steps