Sony MHC-DP1000D - Manual (Page 24)

24 GB
Other operations
To
Stop playback
Pause playback
Select a track or
chapter
Find a point in
a track title or
chapter
(Lock
Search function)
Change the
playback speed
*2
(Slow-motion play)
Playing the disc
frame by frame
changing the
playback speed
*2
(Freeze Frame)
Select a disc when
playback is stopped
Switch to DVD
function from
another source
Exchange other
discs during
playback
Remove the disc
*1 There may be some disturbance in the video
image.
*2 DVD and VIDEO CD only.
*3 SLOW t and STEP c are not available during
playback of VIDEO CDs.
Tips
• You can use the digipad for DVD/VIDEO CD/CD
operations.
• You can use the digipad instead of cursor buttons
(v/V/b/B) when DVD is selected as the current
function and OSD appears on the screen.
Notes
• Depending on the DVD or VIDEO CD, some
operations may be prohibited.
• VIDEO CDs cannot be viewed slowly or frame by
frame in the reverse direction.
• Under the following circumstances, 2CH/MULTI is
automatically set to “2CH”.
– When recording.
– When TAPE B is in REC PAUSE mode.
– When recording using TAPE B.
• When using headphones, the sound from
headphones is 2 channel.
• Switch the channel mode to “2CH” by pressing
2CH/MULTI when making an analog recording
using a component connected to the MD OUT jacks
on this unit. There is no audio output from the MD
OUT jacks in the multi channel mode.
• Depending on the DVD, digital recording may not
be done. In this case, perform analog recording.
Press 2CH/MULTI to switch the channel mode to
“2CH” on this system when making an analog
recording.
• Set the sound to “STEREO” using the AUDIO
button when you play DTS sound tracks on a CD
(page 32).
Do this
Press x. The playback stops at
the point x is pressed (Resume
Play). Press x again to cancel
the Resume Play (see page 28).
Press X *1 .
Press again to resume playback.
During playback or pause, press
> (or NEXT on the remote)
(to go forward) or . (or
PREV on the remote) (to go
back).
Press M or m during
playback. Each time you press
the button, the speed changes as
follows:
1 (slow)
y 2 (faster than 1)
Press nN to stop searching at
the desired point.
During playback, press SLOW
t or T
*3 on the remote. Each
time you press the button, the
speed switches between two
slowed playback speeds. To
return to normal playback, press
nN.
During playback, press STEP
c or C
*3 on the remote.
Each time you press the button,
playback is advanced a single
frame in the desired direction.
To return to normal playback,
press nN.
Press one of the DISC 1–3
buttons or DISC SKIP EX-
CHANGE (or D.SKIP on the
remote).
Press one of the DISC 1–3
buttons (Automatic Source
Selection).
Press DISC SKIP
EX-CHANGE.
Press Z OPEN/CLOSE.
Playing a disc (continued)