Speakers, Dvd/video cd/cd player – Sony MHC-DP1000D User Manual

Page 56

Advertising
background image

56

GB

Troubleshooting (continued)

Speakers

Sound comes from only one channel or
unbalanced left and right volume.

• Check the speaker connection and speaker

placement.

• The source being played back is monaural.
• Adjust the balance parameters (pages 14, 21).

The sound comes from the center speaker only.
(MHC-DP1000D only)

• Depending on the disc, the sound may come

from the center speaker only.

There is no sound from the center speaker.
(MHC-DP1000D only)

• Set the center speaker level to the appropriate

level.

• 2CH/MULTI is set to “2CH”.

• Make sure the DSP effect is on (page 47).

There is no sound from the rear speakers.
(MHC-DP1000D only)

• Set the rear speakers level to the appropriate

level.

• 2CH/MULTI is set to “2CH”.

• The software being played back has limited

sound effects. Check the volume with the test
tone.

No sound or only a very low-level sound is heard
from the rear speakers.

• Make sure the DSP effect is on (page 47).

Sound lacks bass.

• Check that the speaker’s + and – terminals are

connected correctly.

DVD/VIDEO CD/CD Player

The disc tray does not close.

• The disc is not placed properly.

The disc does not play.

• The disc is not lying flat in the disc tray.

• The disc is dirty (see page 53).

• The disc is inserted label side down.

• Moisture condensation has built up.

• The system cannot play CD-ROMs, etc. (page 6).

• The region code on the DVD does not match the

system.

The disc does not start playback from the
beginning.

• Program Play, Shuffle Play, or Repeat Play has

been selected (pages 23, 24, 26, 28). Press
CLEAR to cancel these functions before playing
a disc.

• Resume Play has been selected. When the

playback is stopped, press x, then start DVD
playback (page 28).

• The title, DVD or PBC menu automatically

appears on the screen.

Playback starts automatically.

• The DVD features an auto playback function.

Playback stops automatically.

• Some discs may contain an auto pause signal.

While playing such a disc, the playback stops at
the auto pause signal.

You cannot perform some functions such as
Stop, Search, Slow-motion Play, Repeat Play,
Shuffle Play, or Program Play.

• Depending on the disc, you may not be able to

do some of the operations above. Refer to the
operating instructions supplied with the disc.

Advertising