Sony MHC-DP1000D - Manual (Page 43)

Tape
43 GB
Recording from a tape
(High-Speed Dubbing)
Recording from a VIDEO CD/CD
(CD Synchro Recording)
Recording Manually
Insert a recordable tape into deck B.
Press TAPE A/B repeatedly
to select TAPE A function. Press DVD. Press a function button
for the recording
source.
Insert the tape you want to
record into deck A. Insert the disc you want to
record. Insert the disc, tape, or
tune in the station you
want to record.
Press CD SYNC HI-DUB. Press REC PAUSE/
START.
Deck B stands by for recording.
The REC PAUSE/START button flashes.
To reduce the hiss noise in low-level high-frequency signals, press DOLBY NR so that “DOLBY
NR” appears in the display (except when recording from a tape).
Press DIRECTION repeatedly to select g to record on one side.
Select j (or RELAY) to record on both sides.
Press REC PAUSE/START.
Recording starts.
Steps
1
2
3
4
5
6
Recording to a tape
— CD Synchro Recording/High-Speed Dubbing/Recording Manually/Program
Edit
You can record from a DVD, VIDEO CD, CD, tape, radio or other connected component. You can
use TYPE I (normal) or TYPE II (CrO
2
) tapes. The recording level is adjusted automatically.
To Press
Stop recording x.
Pause recording* REC PAUSE/START.
* Only when recording manually.
Tips
• If you want to record from the reverse side, press
TAPE A/B to select deck B and press nN to
start playback of the reverse side after step 1. Press
x where you want to start recording.
• When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
• (High-Speed Dubbing only)
If you set direction to j when the tapes have
different lengths, the tapes in each deck reverses
independently. If you select RELAY, the tapes in
both decks reverse together.
Notes
• You cannot listen to other sources while recording.
• You cannot use the digipad during recording.
• If you change the setting of sound, such as changing
the preset effect file, while recording, the recording
sound is interrupted at the point.
• If you start recording with the 2CH/MULTI set to
“V.SEMI M.D.”, “MULTI”, or “V.M.DIMENS.”,
the setting automatically changes to “2CH”.
• CD synchro recording is not available with DVDs.
7
Start playing the
recording source.
continued