Sony VGF-HS1 - Manual (Page 12)

1
VGF-HS1 3-98-360-11(1)
Back
 Air vents
 DC IN port
Connect to the AC adapter.
 Network (LAN) port
Connect a network (LAN) cable.
Note
Be sure not to connect any unsupported
networks or any telephone lines to the
Network port. At the time of delivery, this
port is covered by a protective sticker to
warn the users. Remove the sticker before
connecting to the network.
 (USB) port 1 (page 1, 8)
Connect a USB mass storage class device,
such as a digital still camera and a digital
camcorder. This port is also labeled as Rear
USB1 on the Home Server Settings Page
(page 20).
 (USB) port  (page 1, 8)
Connect a USB mass storage class device,
such as a digital still camera and a digital
camcorder. This port is also labeled as Rear
USB2 on the Home Server Settings Page
(page 20).

About attaching/removing the rear cover
Refer to the Setup Guide.
Note
The air vents on the back of your Home Server and the rear cover may get warm while the Home Server is in
operation. Keep this in mind before you touch them.