Sony VGF-HS1 - Manual (Page 23)

3
VGF-HS1 3-98-360-11(1)
Prepar
ation
 To open directly with the browser software
1
Press the DISPLAY button on the Home Server several times to display the Home Server
name or the IP address on the display.
2
Start the browser software on the personal computer.
3
Enter “http://(Home Server name)/” or “http://(IP address)/” and press the Enter key.
The Web top page appears in the browser software window.
4
Click “Home Server Settings Page.”
The Home page is displayed.

Tip
If a window appears, asking for the administrator name and password, enter your registered administrator
name and password and click “Log in.”
Note
Accessing the Home Server Settings Page requires entering the administrator name and the password. If you
cannot remember your administrator name and/or password, press the CANCEL button on the Home Server for
10 seconds or longer to clear the administrator registration and the password settings. For information on the state
of your Home Server after you cleared the settings, see “State of the Home Server after Restoring the Home Server
or the System” on page 56.
Changing the system settings of your Home Server
Access the Home Server Settings Page and change the settings.
If you want to: Go to:
Change the IP address. Network page
Use a proxy server.
Change the work group name to which the Home Server belongs.
Basic Information page
Change the Home Server name on the network.
Change the clock settings on the Home Server.
Date and time page

Tip
For further information on each settings page, click “Help” at the top right corner of the page.
Notes

If you exit the browser software while changing the setup, all modifications applied to the Home Server Settings
Page will be discarded.

Clicking the previous button on the browser software will not display the previous page, but the top page of the
setup item.