Sony VGF-HS1 - Manual (Page 2)


VGF-HS1 3-98-360-11(1)
WARNING
For customers in the USA
FCC Notice
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However,
there is no guarantee that interference will not occur
in a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the
following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment
and receiver.
– Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
– Consult the dealer or an experienced radio/TV
technician for help.
All cables used to connect peripherals must be
shielded and grounded. Operation with cables
connected to peripherals that are not shielded and
grounded may result in interference to radio and
television reception.
You are cautioned that any changes or modifications
not expressly approved in this manual could void
your authority to operate this equipment.
If you have questions about this product, you can write
to the Sony Customer Information Service Center at
12451 Gateway Blvd., Fort Myers, FL 33913, USA or
find Sony Customer Service on the Web site at:
http://esupport.sony.com/EN/VAIO/ for customers in
the USA
To prevent fire or shock hazard, do not
expose the device to rain or moisture.
To avoid electrical shock, do not open
the cabinet. Refer servicing to qualified
personnel only.

Use your product only with the AC adapter
supplied with the unit.

To disconnect your product completely from the
main voltage, unplug the AC adapter from the
mains.

The socket-outlet shall be installed near the
equipment and shall be easily accessible.

Opening or dismantling this equipment, for
whatever reason, could lead to damages that are
not covered by the guarantee.

Sony is not responsible for any interference that
you may experience or that may be caused when
operating this device.

Do not use or store this equipment in a location
subject to heat sources, such as radiators or air
ducts; direct sunlight; excessive dust; moisture or
rain; mechanical vibration or shock; strong
magnets or speakers that are not magnetically
shielded; ambient temperature higher than 95ºF
(35ºC) or less than 50ºF (10ºC); and high humidity.
Owner’s record
The model number and serial number are located on
the bottom of your Home Server.
Record the serial number in the space provided
below. Refer to this number whenever you call your
Sony dealer regarding this product.
Model No. VGF-HS1
Serial No.