Sony VGF-HS1 - Manual (Page 15)

1
VGF-HS1 3-98-360-11(1)
In
tr
oduc
tion
Indicator
light State
INFO Blinks in blue Indicates that a search for the Home Server was initiated by a personal
computer via the network and in progress for device registration
purposes. The indicator light will stop blinking when the Home Server
is selected or canceled.
Blinks in red Indicates that an error occurred while the One Touch Copy
function is active, the Wireless Digital Audio* is connected, or
device registration for one of the Remote Home Access functions
is in progress.
* The VGF-WA1 Wireless Digital Audio may not be available, depending
on the country or region of residency.

Tip
The error description appears on the display. You can press the OK
button to turn off this indicator light.
Lights in red Indicates that an error has occurred while the One Touch Copy
function is NOT active, the Wireless Digital Audio* is NOT
connected, or device registration for one of the Remote Home
Access functions is NOT in progress.
* The VGF-WA1 Wireless Digital Audio may not be available, depending
on the country or region of residency.

Tip
If an error occurs during the Back Up, Data Sync, Home Server backup,
or Home Server restore operation, the error description will be
displayed on the Home Server Settings Page. When you confirm the
error, this indicator light automatically turns off.
Lights in blue Indicates that:

A new file was created or (a) file(s) was updated by one of the
Remote Home Access functions in the last 24 hours.

The VAIO Update software has received an important message
or downloaded a firmware update to the Home Server.

Tip
When you confirm the message or the update on the Home Server
Settings Page, this indicator light automatically stops blinking.
Unlit Other than the above.
HDD Lights in green Indicates that the remaining free space of the internal hard disk drive is
at least 10% of the total capacity and access to the drive is in progress.
Lights in orange Indicates that the remaining free space of the internal hard disk drive is
less than 10% of the total capacity and the drive is in operation.
Blinks in orange Indicates that the remaining free space of the internal hard disk drive is
less than 1 MB.
Blinks in green Indicates that the internal hard disk drive is being formatted.
Blinks alternately in
green and orange
Indicates that the internal hard disk drive is not detected.
Unlit Other than the above.