Pc link software – Sony VGF-HS1 User Manual
Page 72
VGF-HS1 3-98-360-11(1)
Problem
Causes/measures
The INFO indicator light is
blue.
An important message has been downloaded to your Home Server.
Check the Basic Information page on the Home Server Settings Page
for the message.
The INFO indicator light is
red.
An error has occurred on your Home Server. Check the Basic
Information page on the Home Server Settings Page for the error
description.
The INFO indicator light is
blinking in red.
An error has occurred while file transfer by the One Touch Copy
function is in progress, the Wireless Digital Audio is connected, or
device registration for one of the Remote Home Access functions is in
progress. Press the CANCEL button.
The (POWER) indicator
light is blinking in orange.
Your Home Server is in the process of turning on or off. If the indicator
light stays blinking for 10 minutes or longer, unplug the power cord to
shut down the power supply. Then plug the cord back in and turn on
the Home Server.
The (POWER) indicator
light is blinking alternately in
orange and green.
The firmware update is in progress. If the indicator light stays blinking
for 10 minutes or longer, unplug the power cord to shut down the power
supply. Then plug the cord back in and turn on the Home Server.
PC Link software
Problem
Causes/measures
You are notified that the
selected Home Server already
has 5 registered devices and
cannot register your device.
You can register up to 5 devices for Back Up uploading on a single
Home Server. Go to the Back Up page on the Home Server Settings
Page and delete unnecessary profiles.
You are notified that the folder
where you attempted to create
the Send folder for a Data Sync
transmission already includes
the Receive folder for a Data
Sync reception and cannot
create a new Data Sync
(transmitting) profile.
The folder that you specified as the source folder for a Data Sync
transmission has already been specified as the destination folder for a
Data Sync reception. Specify the folder that has not been specified as
the destination folder for any Data Sync reception.
You are notified that the folder
where you attempted to create
the Receive folder for a Data
Sync reception already
includes the Send folder for a
Data Sync transmission and
cannot create a new Data Sync
(receiving) profile.
You cannot specify the folder that includes the source folder for a
backup upload or a Data Sync transmission as the destination folder
for a Data Sync reception. Specify the folder that does not include the
source folder for a backup upload or a Data Sync transmission.